If the position you areusing has an adjustablehead restraint and youare using a single tether,route the tether underthe head restraint and inbetween the headrestraint posts.3. Push and pull the child restraint in differentdirections to be sure it is secure.Securing a Child Restraint in a RearSeat PositionIf your child restraint has the LATCH system, seeLower Anchors and Tethers for Children(LATCH) on page 50.If your child restraint does not have the LATCHsystem, you will be using the lap-shoulderbelt to secure the child restraint in this position. Besure to follow the instructions that came with thechild restraint. Secure the child in the child restraintwhen and as the instructions say.1. Put the child restraint on the seat.2. Pick up the latch plate, and run the lap andshoulder portions of the vehicle’s safety beltthrough or around the restraint. The childrestraint instructions will show you how.3. Buckle the belt. Make sure the release buttonis positioned so you would be able to unbucklethe safety belt quickly if you ever had to.57
