AMAX panel 2000 / AMAX panel 2000 EN Programming sheets | en 79Bosch Sicherheitssysteme GmbH Installation Manual F.01U.241.127 | V4 | 2011.12Example: For IP Address for receiver 128.73.168.7, communication port 7700, program as:128 073 168 007 0770010.1.2 Domestic Programming10.2 System Report Options ProgrammingSystem sends reports to Receiver 1-4 according to system status report options. Thelocations for the reports are 137-144.10.2.1 Report OptionsNOTICE!Programming option anti-replay, acknowledge wait time and pulse interval time are only usedin Bosch network format.Location 120-135Default 15(Enter 15 as the first digit is to disable the function) EN=15Digit Programming Key Digit Programming Key0 0 8 81 1 9 92 2 * 113 3 # 124 4 4 Sec Pause 135 5 15 156 67 7Location 137-144 Location DefaultZone Restore Report Options (Alarm restore, fault restore,bypass restore)137 0Arm/Disarm report option in AWAY Mode 138 6Arm/Disarm report option in STAY Mode 139 6System Status Report Options (Zone fail, comm. fail,telephone line fail, AC fail, low battery...etc.)140 6 EN=1/5/6/7Keypad panic report 141 0Keypad fire report 142 0Keypad medical report 143 0Test report options 144 6 EN=1/5/6/7Zone Status Reporting Options0 No zone status report allowed1 Report to Receiver 12 Report to Receiver 23 Report to Receiver 34 Report to Receiver 4
