2 Installation and commissioning2.4.3. Installation of position switch, axis 1633HAC026048-001 Revision: A© Copyright 2006-2008 ABB. All rights reserved.2.4.3. Installation of position switch, axis 1GeneralThis section details how to install the position switch to axis 1.Location of position switch, axis 1The position switch is installed between the frame and the base, as shown in the figure below.xx0600002676A Position switchB Attachment screws, position switch (2 pcs for each switch) M4 x 16C Holder ringD Attachment screws, holder ring, 6 pcs: M8 x 12E CamF Attachment screws, cam, (8 pcs for each cam) M6 x 12G Attachment plateContinues on next page
