ABB 800xA Operation

Also see for Ability 800xA Series: Operation User manual User manual Operation User manual

Contents

ABB 800xA Operation Manual pdf 289 page image

Appendix A Runtime Templates AI8303BUR002418-600 A 289VALUE CYCLE TIMEEnter the channel value update period (msec) over the fieldbus. Refer to the S800I/O User’s Guide for details of AF 100 loading in relation to cycle time.The valid values are:1, 2, 4, 8, 16, 32, 64, 128, 256, 512, 1024, 2048 and 4096.The default value is 128.AI830S800 I/O AI830 RTD Input Module Templet.ACTIVE 01 through 08If the channel is to be active enter a YES. If the channel will not be used enter a NO.The default value is YES.AUTO DOWNLOADTo automatically download the configuration to the I/O module enter a YES. In thefuture, if the configuration is to be loaded locally enter a NO.Default value is YES.CLUSTEREnter the I/O device cluster of the station where this module is located. The clusterconnected directly to the FCI is number zero (0). The number in this field is 0 -7.Default value is 0.DEAD BAND 01 through 08Enter the difference in successive signal count values before a new value will besent.The valid values are:NONE, 0, 1, 3, 7, 15, 31, 63, 127, 255, 511, 1023, 2047, 4095, 8191 and 16383.The default value is NONE.