Subsystem Status Displays Section 6 Status Displays124 3BUR002418-600 Athe status of Control Modules 1 through 12. ADVANT STATION icons contain twostatus boxes that indicate the status of the Real Time Accelerator Board. AC410 andAC460 icons contain two status boxes that indicate the status of the DCN interfacesubmodules, and AC460 icons have up to three additional status boxes that indicatethe status of controllers.State DefinitionsThe system state executive indicates the current status of a device or subdevicethrough the following state definitions:Subsystem Status DisplaysThe Subsystem Status Displays provide information on the node’s condition.Table 6. State DefinitionsSTATE COLOR DEFINITIONBlank No Control Module configured.ACTIVE Green Device or subdevice is running.AVAILABLE Cyan Program has downloaded and database isdownloading.DOWN Red Fatal failure (that is, communications has failed)or device/subdevice may be down.HOLD Cyan Hardware error (that is, digital input, analoginput) or configured hold to allow other ControlModule with softwired data to become active.IMPAIRED Cyan Backup Control Module running but is not yetrebooted.READY Yellow Database download is complete; normal statefor backup controller.UNKNOWN Red State is not known.
