ABB 800xA Operation

Also see for Ability 800xA Series: Operation User manual User manual Operation User manual

Contents

ABB 800xA Operation Manual pdf 201 page image

Section 8 Operation Examples Single Loop Auto/Manual Transfer3BUR002418-600 A 201Single Loop Auto/Manual TransferOperations required in transferring a single control loop between the automatic andmanual control modes, and the influence of automatic or manual reset on theseoperations is described in this manual.Transfer from Manual to AutomaticThe faceplate displays and control button operations for the transfer from manual toautomatic resembles the example shown in Figure 86.Indicates that the controller is in manual. UseOut field to adjust output in manual.indicates local setpoint is active. The localsetpoint can be changed in automatic. Use thesetpoint slider or the value box [SP] to changethe value with confirmation.Press Auto button to transfer from manual toautomatic control. When the controller is inautomatic, the output value field is no longerhighlighted and the output slider disappears.Press Remote button to switch the setpointfrom local to remote. When the controller is inremote, the setpoint value field is no longerhighlighted and the setpoint slider disappears.Figure 86. Transfer from Manual to Automatic - Faceplate