3Com 7757 Configuration Manual

Also see for Switch 7754: Product guide Datasheet Datasheet Installation guide Product guide

Contents

3Com 7757 Configuration Manual Manual pdf 741 page image

Configuring SNMP Basic Functions 741Configuring SNMPBasic FunctionsThe configuration of SNMP V3 configuration is different from that of SNMP V1and SNMP V2C, therefore SNMP basic function configurations for differentversions are introduced respectively. For specific configurations, refer to Table 595and Table 596.Private MIB DHCP MIBDHCP MIBQACL MIBADBM MIBIGMP Snooping MIBRSTP MIBVLAN MIBDevice managementInterface management-QACL MIB -ADBM MIB -RSTP MIB -VLAN MIB -Device management -Interface management -Table 594 Common MIBsMIB attribute MIB content ReferencesTable 595 Configure SNMP basic functions for SNMP V1 and SNMP V2COperation Command DescriptionEnter system view system-view -Enable SNMP Agent snmp-agent OptionalBy default, SNMP Agent isdisabledTo enable SNMP Agent,you can execute thiscommand or thosecommands used toconfigure SNMP AgentfeaturesSet system information snmp-agentsys-info { contactsys-contact | locationsys-location | version { { v1 |v2c | v3 }* | all } }RequiredBy default, the contactinformation for systemmaintenance is “3ComCorporation”, the systemlocation is “Marlborough,MA”, and the SNMPversion is SNMP V3