1-9Operation Command RemarksConfigure a description for anaggregation grouplink-aggregation group agg-iddescription agg-nameOptionalBy default, no description isconfigured for an aggregationgroup.If you have saved the current configuration with the save command, after system reboot, theconfiguration concerning manual and static aggregation groups and their descriptions still exists, butthat of dynamic aggregation groups and their descriptions gets lost.Displaying and Maintaining Link Aggregation ConfigurationAfter the above configuration, you can execute the display command in any view to display the runningstatus after the link aggregation configuration and verify your configuration. Execute the resetcommand in user view to clear LACP statistics on ports.Table 1-5 Display and maintain link aggregation configurationOperation Command RemarksDisplay summary information of allaggregation groups display link-aggregation summaryDisplay detailed information of a specificaggregation group or all aggregationgroupsdisplay link-aggregation verbose[ agg-id ]Display link aggregation details of aspecified port or port rangedisplay link-aggregation interfaceinterface-type interface-number [ tointerface-type interface-number ]Display local device ID display lacp system-idAvailable inany viewClear LACP statistics about a specifiedport or port rangereset lacp statistics [ interfaceinterface-type interface-number [ tointerface-type interface-number ] ]Available inuser viewLink Aggregation Configuration ExampleEthernet Port Aggregation Configuration ExampleNetwork requirementsz Switch A connects to Switch B with three ports Ethernet1/0/1 to Ethernet1/0/3. It is required thatincoming/outgoing load between the two switches can be shared among the three ports.z Adopt three different aggregation modes to implement link aggregation on the three ports betweenswitch A and B.
