Command Information 19CommandInformationEach software command has its own description in this guide. Eachcommand description begins at the top of a page. A commanddescription begins with these items:n The complete text of a commandn Type of modules on which this command is valid, as indicated bycheck marks (3)n A short description of the purpose of the commandn The command description continues with one or more of thefollowing sections:n Valid Minimum Abbreviation — This section lists the shortestnumber of characters that you can type to issue the command.n Important Considerations — These usage notes identifypotential issues or requirements. For a complete list or discussion ofissues, see the Switch 4007 Implementation Guide.n Options — If the command begins a configuration process orother procedure, this section presents each prompt that you see, itsdescription, the possible values that you can enter, and the defaultvalue.n Fields — If the command prompts the module to displayinformation, this section lists the display parameters and theirdefinitions.n Procedure — Numbered steps walk you through complexcommands.n Example — Examples show the interactive display when itprovides additional useful information.The Switch 4007 software and management interfaces are built fromCoreBuilder ® 9000 switch technology. In Switch 4007 softwarereleases 3.0.0 and 3.0.5, the prompts and displays in all interfaces mayindicate this heritage.
