Scanning60 DocuMate 250 Scanner User’s GuideConfiguring Before ScanningChoosing Configure Before Scan simply opens a scanninginterface when you press or click a scan button. You can then usethe interface to change the Resolution, Scan Mode, and othersettings. When you scan, the scanned image will still be sent asthe file type and to the same Destination Application alreadyselected in the One Touch Properties window for that button.To configure before scanning:1. Open the One Touch Properties window.2. Select the scan configuration Configure Before Scan.3. Right-click on Configure Before Scan and choose an interfaceto use for configuring before scanning.TWAIN—The TWAIN interface opens for you to make changesprior to scanning. See “Scanning with the TWAIN Interfacefrom PaperPort” on page 81.ISIS—The ISIS Scan interface opens for you to make changesprior to scanning. See “Scanning with the ISIS Interface” onpage 100.WIA—The Windows Image Acquisition Interface (WIA) opensfor you to make changes prior to scanning. The WIA option isonly available if your computer is running Microsoft WindowsXP. See “Scanning with the WIA Interface” on page 95.4. Click OK or Apply on the One Touch Properties window.Select ConfigureBefore Scan.Right-click on ConfigureBefore Scan to get themenu, and choose theinterface to use forconfiguring.
