Xerox DocuMate 250 User Manual

Also see for DocuMate 250: Hardware replacement guide User guide Installation guide

Contents

Xerox DocuMate 250 User Manual Manual pdf 32 page image

DocuMate 250 Scanner User’s Guide 27ScanningCheck the Scan Settings Before Scanning1. To check the scan settings before scanning, press, hold down,and then release, the Scan button.The One Touch Properties window opens for you to view andchange the configuration settings of the Scan button.To Refresh the One Touch 4.0 settings, click the Refreshbutton.The One Touch Button Panel also opens at the bottom right ofyour computer screen.If you make changes in the One Touch Properties window, thenclick the Apply button, the information in the One Touch panelwill update to show the new settings.2. When you are ready to scan, press the Scan button on thescanner, or click OK to close the window then click the buttonon the One Touch Button Panel.Press, hold down,and then releasethe Scan button tosee the currentscan settings.Note: The configurations shownon this example of the OneTouch Properties window are forillustration purposes only. Theconfigurations you see on yourOne Touch Properties windowmay be different.The icon indicates theDestination Application forthis setting.Your document will be scanned withthese scanner settings.