DocuMate 252 Scanner Userís Guide 79Scanning from PaperPortThe Scan Info BoxThe following figure shows the information on the Scan Info box:Creating a New Advanced Interface ProfileYou cannot change the settings of the preset profiles in theAdvanced Interface. However you can create new profiles andsave them for future use.To create a new profile:1. On the Advanced Interface, select one of the preset profiles, forexample, Black&White Configurations/Custom.2. Adjust the settings as required and then click the Save Asbutton.The Save Profile dialog box opens.3. Type a name for the new profile and click OK. The name mustbe at least two characters long.Your new profile is added to the configuration list.To change or delete a profile you created:1. Select your profile from the configuration list.2. Make changes to the profile as needed, and then click Save.3. If you want to delete the selected profile, click Delete.Location of the topleft corner of theimage in thePreview windowPhysical size of theimage to scanSize of the file of thescanned imageThe space on yourcomputerís hard driveCurrent location ofthe pointer as youdrag it on thePreview window
