8825/8830 DDS User Guide/8Getting to know the 8825/8830 DDSThe ScannerDDS User InterfaceOption keys and Feature keys (continued)Output Format − PresetPreset permits the operator to select a predefined length to which the rollmedia should be cut during printing. A width may also be selected, and if theMedia Source selection is set to Auto, the system will select the roll ofmedia that best matches the width. If Media Source is set to R1, R2, or R3,then the selected roll will be used regardless of the width specification.To select the Preset mode, press the key under Output Format until thePreset indicator illuminates. The SELECT OUTPUT FORMAT screen isdisplayed.Press the Next key or the Previous key to select an item from the list.Press the Enter key to confirm the choice.Note: formats may be added or removed from this list. Refer to theReferencessection, Copy Options - Media Seriesand Copy Options -Custom Media Formatsfor more information.Press the Exit key to leave the screen.Output Format - SynchroWhen the Synchro mode is selected, the 8825/8830 DDS measures thelength of the original as it passes through the Scanner and automaticallycuts the media at the printer to match the length of the original document.Synchro is the factory default.FilmBondAutoR2R3PresetMedia SelectionSource Type Output FormatSheetSynchroManualR1Vellum/TracingPRESET OUTPUT FORMATSELECT 8.5 X 11 ANSI A
