8825/8830 DDS User Guide/60Scanning to the Network (SCAN mode)(continued)Clearing the scanned imagesThe operator may remove scanned images from the 8825/8830 DDS harddisk by pressing the C/CA key. The CLEAR SCANNED IMAGE screen isdisplayed.Press the Next key to scroll through the choices. Then press the Enter keyto execute the selection. The choices are:• DO NOT CLEAR IMAGE. The image is not deleted.• CLEAR LAST IMAGE. The last image scanned by the currently activeaccount is deleted. Press the C/CA key again, followed by the Enter key,to delete the next-to-last scanned image. This process can be repeateduntil all desired images are removed from the hard disk.Note: it is not possible to skip images. For example, it is not possible toleave the last image scanned, but delete the next-to-last image scanned.• CLEAR ALL IMAGES. All images stored under the currently activeaccount are deleted.Note: if Job Accounting is not enabled, the images are deleted fromsubaccount 0.1.PrinterInterruptSampleTransformStop Start1 2 34 5 67 8 9. 0 C/CAStore/RecallMarginSets BuildFinisherCLEAR SCANNED IMAGEDO NOT CLEAR IMAGE
