8825/8830 DDS User Guide/7Getting to know the 8825/8830 DDSThe ScannerDDS User Interface (continued)Option keys and Feature keysOutput Format − ManualThe Output Format button selects the size to which the roll feed media willbe cut.Manual allows the operator to enter the desired length and width manually.To select the Manual mode, press the key under Output Format until theManual indicator illuminates. The CUSTOM OUTPUT FORMAT screen isdisplayed.Press the Next key to select WIDTH or LENGTH. Press the Enter key toconfirm the choice.Enter a value, using the Numeric Keypad.Note: the entered value must be within the limits shown in parentheses onthe screen.Press the Enter key to confirm the value.When the values for WIDTH and LENGTH are correct, press the Exit key toleave the screen.FilmBondAutoR2R3PresetMedia SelectionSource Type Output FormatSheetSynchroManualR1Vellum/TracingCUSTOM OUTPUT FORMATENTER CUSTOM MEDIA SIZEWIDTH (11.0 - 36.0): 11.0 INLENGTH (8.3 - 1200): 8.5 IN
