ScanningXerox ® WorkCentre® 7220/7220i/7225/7225i Color Multifunction Printer 135User GuideAdding a Scan Destination1. At your computer, open a Web browser, in the address field, type the IP address of the printer, thenpress Enter or Return.2. Click the Scan tab.3. In the Display area, select Templates.4. Under Template Operations, click Create New Template.5. In the New Distribution Template area, under Add Destination to Template, click Enter a ScanDestination.6. Click the Friendly Name: field, then create a name for the template.7. Under Protocol, select an option.8. Configure the destination IP Address: Port number or Host Name: Port number.9. Enter the name of the destination folder as needed. In SMB, the destination folder is the sharedfolder.10. In Document Path, enter the name of the sub folder within the destination folder, then select aFiling Policy.11. Enter a valid login name and password.Note: Use the login name for the computer that holds the destination folder. The login name caninclude the domain name also, such as domain name\login name.12. Click Add. The template is stored on the printer hard drive.
