6464INSTALLATION30304954356256854656558023 min.30133 min.8 Ø 8Ø 22MOUNTING ON A BASE (VALLOX 145MV)NOTEVallox 145 MV must always be installed on a base on the floor, oron the wall using a mounting plate.The base is optional. Adjust the base with adjusting legs to levelit. Remove the (4 pcs) rubber plugs at the bottom of the unit. Placethe unit on top of the base so that the bars of the base fit in theholes at the bottom of the unit.A Thread bar M8 x 35, shorter thread upwardB The length of the adjusting screw is 37mmMEASURING TUBESThe accessories delivered with the unit include four airflowmeasuring tubes. These can be inserted in the ducts to allow foreasier ventilation adjustment.921Ø616
