Menu
Vallox TSK Multi 80 MV Manual
Also see for 096 MV: Installation instructionsUser manualInstructions for use, maintenance and installationManualManual
                                                                                                            | |
Contents
| 
20SETUP WIZARD PROFILE SETTINGSNOTEBy default, the At home profile uses the higher basic ventilationfan speed. We recommend that this basic ventilation setting beused with the At home profile. Once you have set the fan speedfor the At home profile, the fan speed for the Away profile willby default be set to -30% of the At home profile fan speed.We recommend that the default fan speed settings be used.However, the settings can be changed as required.At home and Away profilesTo set the ventilation settings of the profiles:1. Use the Plus or Minus buttons to set the profile fan speedas a percentage of the maximum output ratio.2. The fan speed is now set for the profile.3. Proceed to the next phase by selecting Right arrow.4. Use the Plus or Minus buttons to set the desired supply airtemperature for the profile. You can adjust the temperaturein the range +10°C ... +25°C.5. The profile supply air temperature is now set.6. Proceed to the next phase by selecting Right arrow.7. Use the Plus and Minus buttons to turn the automatic fanspeed control based on relative humidity of air on or off.8. The automatic fan speed control, based on the relativehumidity of air, is now set.9. Proceed to the next phase by selecting Right arrow.10. Use the Plus and Minus buttons to turn the automatic fanspeed control based on carbon dioxide content on or off.11. The automatic fan speed control, based on the carbondioxide level, is now set.12. Select OK.13. Proceed to the settings of the next profile by selecting Rightarrow.NOTEOnce you have set the fan speed for the At home profile, thefan speed for the Boost profile will by default be set to +30%of the At home profile fan speed. It is recommended that thisfan speed setting be used for the Boost profile. However, thesetting can be changed as required.Boost profileThe fan speed, supply air temperature, and the automatic fanspeed control (based on either relative humidity of air or carbondioxide level) is set for the Boost profile in the same way as forthe At home and Away profiles. The Boost profile also has atimer setting.TIPYou can browse the At homeprofile settings with the Rightarrow button.EXPERT SETTINGS |
Related manuals for Vallox 096 MV
Product
Learn More
Legal
Copyright © 2024 OneStart. All Rights Reserved