Menu
Vallox TSK Multi 80 MV Manual
Also see for 096 MV: Installation instructionsUser manualInstructions for use, maintenance and installationManualManual
                                                                                                            | |
Contents
| 
21© Vallox Oy - All rights reservedSETUP WIZARDEXPERT SETTINGS1. Use the Plus and Minus buttons to turn the profile timerfunction on or off. The options are:• On — When the timer is on, the Boost profile is used only for theperiod specified in the timer.• Off — When the timer is off, the Boost profile is used until theprofile is changed, either manually or automatically by the weekclock.2. Proceed to the next phase by selecting Right arrow.3. Use the Plus and Minus buttons to set the profile timer durationin minutes.4. Select OK.5. Proceed to the settings of the next profile by selecting Rightarrow.Fireplace profile1. Use the Plus and Minus buttons to set the Fireplace profiletimer duration in minutes.2. The Fireplace profile timer duration is now set.3. Proceed to the next phase by selecting Right arrow.4. Use the Plus and Minus buttons to set the Fireplace profile’ssupply air fan speed as a percentage of the maximum outputratio.TIPIt is recommended that a higher supply air fan speed be used inthe fireplace profile to create overpressure in the ventilation zone.Reducing the extract air fan speed is not recommended.5. The supply air fan speed of the Fireplace profile is now set.6. Proceed to the next phase by selecting Right arrow.7. Use the Plus and Minus buttons to set the extract air fan speedof the Fireplace profile as a percentage of the maximum outputratio.8. The extract air fan speed of the Fireplace profile is now set.9. Proceed to the next phase by selecting Right arrow.10. Use the Plus and Minus buttons to turn the profile timerfunction on or off. The options are:• On — When the timer is on, the Fireplace profile is used only for theperiod specified by the timer.• Off — When the timer is off, the Fireplace profile is used until theprofile is changed, either manually or automatically by the Weekclock.11. The profile timer function is now set.12. Select OK.IMPORTANTDo not turn the timer function off if there is no timer in the externalfireplace switch.Finishing the setupOnce you have completed all phases of the setup, finish up thesetup as follows:1. To change any of the set values, use the arrow buttons toreturn to the desired line and then press OK.2. When you are satisfied with the settings, use the arrow buttonsto select Start and then press OK.TIPYou can browse the settingsof the Boost or the Fireplaceprofile by using the Right arrowbutton. |
Related manuals for Vallox 096 MV
Product
Learn More
Legal
Copyright © 2024 OneStart. All Rights Reserved