90Search and Close Call OptionsNote: This feature does not operate when the scanner isin AM modulation mode.Screening Out Paging SystemsJ 4 Srch/CloCall Opt J E 4Pager Screen J EThis setting determines whether the scannerautomatically ignores transmissions found duringsearching or Close Call operation that are on commonpaging system frequencies.On The scanner skips known paging system frequencies.Off The scanner stops on any detected transmission,including paging systems.Notes:• The default setting for this feature is On.• The frequencies include paging systems and also theNOAA weather frequencies.• Even with the feature on, you might hear somepaging systems. Some frequencies are sharedbetween business radio systems and pagingsystems. If the scanner stops on a paging systemeven with this feature turned on, manually lock it out bypressing L/O.Finding Repeater Output FrequenciesJ 4 Srch/CloCall Opt J E 4Repeater Find J EThis feature sets whether the scanner tries to tune to arepeater output frequency during Close Call operationwhen it detects a transmission on a repeater inputfrequency. Since you can normally only hear one side of aconversation when you listen to an input frequencytransmission, turning this feature on can let you hear bothsides of the conversation.MenuMenu
