64Programming/Editing Optional SettingsEdit Sys Option J E 4Set Quick KeyJ EAfter selecting this option, press 0-9 to assign the systemto a quick key or press No to assign the system to noquick key, then press E.Hints:• You can assign as many systems to the same quickkey as you want.• Preprogrammed systems are set to quick key 9.• To be scanned, a system’s quick key must beactivated and the system must be unlocked.Setting System LockoutJ program system J E 4Select the system J E 4Edit Sys Option J E 4Set LockoutJ EThis setting controls whether the system is scanned whenits quick key is enabled. Rotate the scroll control to selectyour setting, then press E.Locked - the system is not scannedUnlocked - the system is scannedNote: You can also lock or unlock a system by pressing, selecting the system, then pressing + L/O.Setting the System Hold TimeJ program system J E 4Select the system J E 4Edit Sys Option J E 4Set Hold TimeJ EThis setting controls how many seconds the scannerscans a system before moving to the next unlockedsystem. Enter a value from 0-255, then press E to savethe setting.MenuFunc FuncMenu
