72Programming/Editing Optional Settings3. Repeat Steps 1 and 2 until you have entered thesystem name. Then press E or press down on thescroll control to accept the setting.Hints:• Each group name can be up to 16 characters.Abbreviate as necessary to fit.• The group and system name alternate in the top lineof the display when the scanner stops on a channel.• Press twice to delete the current character.• Press three times to clear the entire alpha tag.Setting the Group Quick KeyJ program system J E 4Select the system J E 4Edit Group J E 4Select the group J E 4Set Quick KeyJ EAfter selecting this option, press 0-9 to assign the groupto a quick key or press No to assign the system to noquick key, then press E.Hints:• You can assign as many groups to the same quickkey as you want.• To be scanned, a group’s quick key must beactivated.Setting Group LockoutJ program system J E 4Select the system J E 4Edit Group J E 4Select the group J E 4Set Lockout J EThis setting determines whether the scanner will scan thisgroup when it is enabled. Select your setting, then press E.MenuMenu
