75Programming/Editing Optional SettingsSetting Channel AlertJ program system J E 4Select the system J E 4Edit Group J E 4Select the group J E 4Edit Channel J E 4Select the channel J E 4Set Alert J EThis setting controls whether the scanner will alert youwhen the channel becomes active. Select your setting,then press E.On - the scanner beeps when the channel becomes active.Off - no alert sounds.Notes:• Channel alert does not work if key beep is turned off.• The default setting for channel alert is Off.Setting CTCSS/DCS(Conventional Channels Only)J program system J E 4Select the system J E 4Edit Group J E 4Select the group J E 4Edit Channel J E 4Select the channel J E 4Set CTCSS/DCS J EThis setting controls how a subaudible CTCSS or DCS isused for the channel. Select your setting, then press E.Off - any signal opens squelch.Search - the scanner searches for and displays anyCTCSS or DCS tone that accompanies the transmission.MenuMenu
