66Programming/Editing Optional SettingsID Search - the scanner stops on any transmission forunlocked talk group ID's.Note: You can also change this setting by pressing Scanwhile scanning the system.Setting the Base Frequency/Step/Offset(Motorola UHF/VHF Systems Only)J program system J E 4Select the system J E 4Edit Sys Option J E 4Edit Band Plan J E 4Select Plan J Select a band plan (1, 2, or 3) J E 4Input Base Freq J Input the base frequency J E 4Select Step (5 kHz, 12.5 kHz, 25.0 kHz, 37.5 kHz, 50.0kHz, 62,5 kHz, 75.0 kHz, 87.5 Khz, or 100.0 kHz) J E 4Offset (380-759) J Input the offset J EThis setting lets you enter the base frequency, step, andoffset for the band plan you select. This information letsyou set the scanner so it will scan a Motorola UHF/VHF system.Setting Data Skip(Conventional Systems Only)J program system J E 4Select the system J E 4Edit Sys Option J E 4Set DATA SKIPJ EThis setting controls how the scanner behaves when itstops on a channel that has a data signal.On - the scanner stops briefly on the channel, but thenimmediately resumes scanning automatically. Press E toselect.Off - the scanner remains on the channel until thetransmission stops. Press E to select.MenuMenu
