45Basic Operation3. To quick-store the channel or talk group ID, press E.Otherwise, press No.If you enter a frequency then press E, the scannerstores it in the Qck Save Grp group in a system calledQck Save Cnv Sys. These are created if they do notexist. Then, the scanner prompts you to save otherchannel settings.If you enter a talk group ID then press E, the scannerprompts you to rotate the scroll control to select thesystem where you want to store the ID. The ID isstored into a channel group named Qck Save Grp inthe selected system. Only systems that match the IDtype are shown.If you pressed No in Step 3, the scanner prompts youto select the system and the group where you want tostore the frequency or talk group ID.Quickly Recalling Channels1. Press Hold to hold on any channel.2. Press + Rcl. The scanner prompts you to selectthe system where the channel is stored.3. Rotate the scroll control to select the system, thenpress E. The scanner prompts you to select thechannel group where the channel is stored.4. Rotate the scroll control to select the group, thenpress E. The scanner prompts you to select achannel.5. Rotate the scroll control to select the channel, thenpress E to hold on that channel.Monitoring Trunking ActivityTo monitor trunking activity, press Hold then turn thescroll control to select the control channel frequency (for aMotorola or EDACS system) or any system frequency (foran LTR system). Active talk group ID’s appear on the sec-ond line of the display.Func
