Toshiba strata CT Installation & Maintenance Manual

Also see for Strata CT: User guide Supervisor guide User guide Quick reference guide Guide

Contents

Strata CT Configuration1-18 Strata CT I&M Manual October 2000 Cables are provided according to the connectors on the RRCU card to which they areattached. See Table 1-12 for connector information.4. ISDN PRI Digital Line PCBsRPTU must be placed in designated slots as shown in Table 1-13. The RPTU PCB canprovide 30 ISDN PRI lines. The RPTU slot provides 30 PRI lines.Table 1-11 RRCU PCB/ Remote Cabinet ConfigurationRRCU PCBsNeeded inBase CabinetRemote Cabinet Configuration RRCU PCBs Needed atRemote Location (s)1 1 or 2 Remote Cabinets in one location 12 2 to 4 Remote Cabinets in two locations or 3 to 4 Remotecabinets in one location. 23 3 cabinets if cabinets are in separate remote locations. 34 4 cabinets if cabinets are in separate remote locations. 4Table 1-12 Remote Cabinet Data Cables and ConnectorsData Cables RRCU ConnectorsM1 S1 M2 S2BDCL1A-MS1 X XBDCL1A-M2 XBDCL1A-S2 XX=applies to connectorTable 1-13 RPTU PCB Cabinet Slot ConfigurationPRI LinesNeededSlotsNeeded RPTU PCBs Needed 11. RPTU PCBs do not have to be installed in the order shown in this table. Example: If only one RPTU is needed, it can beinstalled in any RPTU slot shown in the table so long as the slot is supported by the installed processor.2 The slot occupied by RPTU supports 30 channels; the slot adjacent to RPTU must be vacant.RPTU cabinet slot placement1Base Cabinet1~30 2 1 S103-RPTU31~60 4 2 S105-RPTU61~90 6 3 S107-RPTUSecond through fifth cabinets1~30 2 1 S_01-RPTU31~60 4 2 S_03-RPTU61~90 6 3 S_05-RPTU