Toshiba strata CT Installation & Maintenance Manual

Also see for Strata CT: User guide Supervisor guide User guide Quick reference guide Guide

Contents

Universal Slot PCBs3-24 Strata CT I&M Manual October 2000PEMU ProgrammingProgram 03: Specify Code 13 for slots that support PEMUs and make sure BRCS is enabledfor DTMF operation.Program 04: Specifies [PDNs]. These are also the numbers that must be received by incomingTie lines to route calls to the proper telephones.Program *09: Assigns Tie Line Ringing to ACD Groups.Program 10-1: Enables/disables two-line conference.Program 10-4: Assigns Toll Restriction (maximum number of Tie line calls diallingsimultaneously).Program 10-5: Assigns privacy on Tie line transferred calls.Program 12: Assigns various timing options to the Tie lines.Program 15: Assigns tandem connections and dial pulse option to tie lines.Program 16: Assigns Tie lines to line groups.Program 17: Assigns immediate or wink start to PEMU tie lines.Important! Also used to turn on tie line dial tone return.Note When a PEMU is installed in a system, it automatically assumes the next fourconsecutive Exchange line numbers.Program 39: Assigns line access buttons to digital and electronic telephones.Program 40: Assigns station access to Tie lines (incoming and outgoing).Program 41: Assigns station access to Tie lines (outgoing).Programs 48 & *48: Assigns the level of Toll Restriction to the Tie Line Groups.Program *53: Assigns outgoing digit translation.Program *54: Assigns incoming digit translation.Programs 50~56: Assigns LCR, if using the network as a route option.Program 81 ~ 83: Tie to [DN] ringing assignments.Program 93: Assigns a name to a tie line