Menu
Toshiba Perfecptione Installation And Maintenance Manual
                                                                                                                                                                                                                                                                                                                                                                                |
TABLE7-3Procedure - Standard Telephone Data BlockPROGRAMMINGPROCEDURESSECTION 200-255-307JANUARY1993Authorization Procedure must be completed. If an OK response is received, proceed as follows:ITEM PROMPT USER ENTRY NOTEOK DS-IT JY-IAl,Port Number- DISK LOADING --Q NEW, CHG, OUTPOR LNNX l&2Directory Number I DN 1 - 4 digits I 3 IStation Mix SMX Y or NClass of Service cos o- 15 4Tenant Number TEN 0 or 1 5Call Pickup Group PUG 0 - 31 or NONE 6Hunt numberDialing TypeSpeed Dial ListHNT 1 - 4 digits, #X, or NONE 7DLG DIP, TON, MNL XXXX 8SDL SDC XX, SDU XX, or NONE 9Warning Tone Allowed?Call Forward to TrunkWTACFTY or NY or N10Toll Restriction ClassMessage Waiting LampEmergency Ringdown StationOff-hook Call AnnounceTOLMWLRDSOCA0-8orNONEY or N1 - 4 digits, ATT, UNA, or NONEAorM11I -JQ Repeat program, if necessary I INOTES: (continued)1. NN = PCB location.-2. X = Circuit number.3. 4-, 3-, 2-, or l-digit DNs are allowed if there is no conflict (e.g., 30X is not allowed if 30 is used).4. There are 16 different COS groups which are defined in the DCOS Data Block.5. When RNA calls recall to the Attendant, they will recall to the Attendant (0 or 1) that ORIGINALLYtransferred the call.6. There is a maximum of 32 Call Pickup Groups.7. The number to which this DN hunts.#X = Station Hunt-Distributed,X = Distributed hunt group number (0 - 3), Maximum 8 members per group.NONE = No hunt.8. DIP = Dial Pulse. TON = DTMF. MNL XXXX = Manual Line Direct to DN (1 - 4 digits), ATT 0, orA777.9. SDC XX makes the station a controller of Station Speed Dial List XX (XX = 01 - 50).SDU XX makes the station a user of Station Speed Dial List XX (XX = 01 - 50).10. Y = Warning tones applied (call waiting feature activated).N = No warning tones applied (camp-on feature activated).7-15.I |
Related manuals for Toshiba Perfecptione
This manual is suitable for:
Product
Learn More
Legal
Copyright © 2024 OneStart. All Rights Reserved