Toshiba D-VR17KB Owner's Manual

Contents

21ENIntroduction Connections Basic Setup Playback Editing VCR Functions OthersFunction SetupRecordingConnecting a Dolby Digital™ decoder, DTSdecoder or MPEG decoder• Connecting multi-channel Dolby Digital decoderallows you to enjoy the Multi-channel Dolby Digitalsurround system as well as DTS decoder, Multi-channel surround system.• After connecting to a Dolby Digital decoder, set“Dolby Digital” to “Stream” in the Audio Out menu.(See page 67.)• After connecting to a DTS decoder, set “DTS” to“ON” in the Audio Out menu. (See page 67.)• After connecting to a MPEG decoder, set “MPEG” to“Stream” in the Audio Out menu. (See page 67.)Connecting to an MD deck or DAT deck• The audio source recorded in Dolby Digital Multi-channel surround format cannot be recorded usingan MD or DAT deck as a digital sound.• If not connected to a Dolby Digital decoder, set“Dolby Digital” to “PCM” in the Audio Out menu.Playing back a DVD using incorrect settings maygenerate noise distortion and damage speakers.• Set “Dolby Digital” and “MPEG” to “PCM” and set“DTS” to “OFF” in the Audio Out menu forconnecting to an MD or DAT deck.• You can use AUDIO OUT jacks for the connection ofyour audio system.After You Have CompletedConnectionsSwitch the input selector on your TV to an appropriateexternal input channel. For details, refer to theOwner’s Manual of your TV.Note• Connect this unit directly to the TV. If the AV cablesare connected to a VCR, pictures may be distorteddue to the effects of the copy protection system.E9GA0BD_EN.book Page 21 Monday, March 26, 2007 10:14 AM