Menu
Toshiba BG205M-CS Instruction Manual
                                                                                  | |
Contents
|
74 / 80Copyright © 2014 TOSHIBA TELI CORPORATION, All rights reserved. http://www.toshiba-teli.co.jp/index.htmD4235067D● RegistersRegister Visibility Access DescriptionUserSetSelector Beginner R/W Selects a bank of user setting.UserSetLoad Beginner W Executes load of the user setting.UserSetSave Beginner W Executes to save the user setting.UserSetDefaultSelector Beginner R/W Selects a bank of user setting when camera powers up.● Setting- Select a bank of the user settingSet the following value to “UserSetSelector” register. The setting value is Enumeration type.Select the bank of user setting for “UserSetLoad” and “UserSetSave”.Value Description Save LoadDefault (*) Memory bank to read initial factory setting data. × ○UserSet1 Memory bank 1 for user setting. ○ ○UserSet2 Memory bank 2 for user setting. ○ ○UserSet3 Memory bank 3 for user setting. ○ ○* initial factory setting“Default” bank is only used for loading data. If you want to restore a camera setting to the initial factorysetting, please load “Default” bank.- Load/Save a user settingWhen execute “UserSetLoad”, the camera loads the user setting of bank that is selected in“UserSetSelector” register and applies them.When execute “UserSetSave”, the camera saves a user setting that was applied to the bank that isselected in “UserSetSelector” register.- Load the user setting at the time of start-upSet the following value to “UserSetDefaultSelector” register. The setting value is Enumeration type.When select “UserSetDefaultSelector” register and save it, the camera loads the user setting of bank thatis selected in “UserSetDefaultSelector” register and applies them at the time of next start-up.● NoteChanging “UserSetLoad” register value is invalid during image stream data output. |
This manual is suitable for:
Product
Learn More
Legal
Copyright © 2024 OneStart. All Rights Reserved