15 / 80Copyright © 2014 TOSHIBA TELI CORPORATION, All rights reserved. http://www.toshiba-teli.co.jp/index.htmD4235067DConfigurationThe system configuration of this camera series is as follows;This camera does not include any accessories. Please prepare other equipments separately.● Camera: This product. (BG series)● Camera mounting kit CPT8600 (*1): To fix a camera to a tripod; attach this to the bottom of thecamera.● LAN Cable (*2): This cable is used to connect the camera to host equipment.Ethernet packets (stream and control) are transmitted via thiscable. Please use a LAN cable that supports 1000BASE-T (Cat5e or over). This product is able to connect a LAN cable that isequipped with screw lock mechanism. Please use it as needed.● Network Interface Card (NIC) (*2): This is the interface card to connect to the camera. Usually thiscard is installed to expansion slot of host equipment such as PCetc. Please use 1000BASE-T NIC, supporting Jumbo Frame isrecommended.● PoE Switching HUB etc. (*2): Use these equipments when you supply power to the camerafrom PoE. Please use 1000BASE-T equipments, supportingJumbo Frame is recommended.*1: Optional part. Contact your dealer / distributor for details of option units.*2: Commercial items.