4 / 80Copyright © 2014 TOSHIBA TELI CORPORATION, All rights reserved. http://www.toshiba-teli.co.jp/index.htmD4235067DCAUTION Observe the following when installing the equipment:·Do not cover the equipment with a cloth, etc.·Do not place the equipment in a narrow location where heat is likely to accumulate.Otherwise, heat will accumulate inside the equipment, possibly resulting in a fire.Instruction Do not place the equipment in locations subject to high moisture, oil fumes,steam, or dust.Otherwise, fire or electric shock may result.Avoid Do not install the equipment in locations exposed to direct sunlight or humidity.Otherwise, the internal temperature of the equipment will rise, which may cause a fire.Avoid Use only specified the power cable and the connection cables.Otherwise, fire or electric shock may result.Instruction Do not give strong impact against the equipment.It may cause the trouble.Avoid When performing connection, turn off power.When connecting the power cable and the connection cable, turn off the equipmentpower.Otherwise, fire or electric shock may result.Instruction Do not expose its camera head to any intensive light (such as direct sunlight).Otherwise, its inner image pickup device might get damaged.Avoid Avoid short-circuiting signal output.Otherwise, a malfunction may occur.Avoid Avoid giving a strong shock against the camera body.It might cause a breakdown or damage. If your camera is used in a system where itscamera connector is subjected to strong repetitive shocks, its camera connector ispossible to break down. If you intend to use your camera in such a situation, if possible,bundle and fix a camera cable in the place near the camera, and do not transmit ashock to the camera connector.Avoid Contact your sales representative to request periodic inspection and cleaning(every approx five years).Accumulation of dust inside the equipment may result in fire or electric shock.For inspection and cleaning costs, contact your sales representative.Instruction