36 Setting Up the System for the First Time — Initial Setup WizardSetting Up theSystem for the FirstTime — Initial SetupWizardWhen you turn on the CommunicationTerminal for the first time after installationand the self-diagnosis is completed, thesetup wizard appears on the monitor screen.Register your local system data with thesetup wizard using the Remote Commander.• You can change the settings made with thesetup wizard later using the Setup menus.• The setup wizard will also be displayed whenyou install the PCSA-B384S, or PCSA-B768S ISDN Unit to your system later.Perform the setup again.1 Select the language used for the on-screen menus and messages in theLanguage Setup Wizard.Language: Select one of the followinglanguages; English, French, German,Japanese, Spanish, Italian, SimplifiedChinese, Portuguese, TraditionalChinese, Korean, Dutch, Swedish,Danish, Finnish, Polish, Russian, orArabic.2 Use the V, v, B or b button on theRemote Commander to select “Next”,then press the PUSH ENTER button.The Monitor Setup Wizard appears.3 Select a monitor from which signalsare output.If you select a monitor, other monitors thanthat you selected display no menus.MonitorsSelect the number of monitorsconnected to the system.1: One monitor connected.2: Two monitors connected.3: Three monitors connected.ConnectionSelects the output connector to whichthe device to be used is connected.VIDEO 1: Selects the device connectedto the VIDEO 1 connector.VIDEO 2: Selects the device connectedto the VIDEO 2 connector.RGB OUT: Selects the deviceconnected to the RGB OUTconnector as the main monitor.RGB OUT (DSB): Selects the deviceconnected to the RGB OUTconnector on the Data Solution Box.MonitorAllows you to define the monitorconnected to the correspondingconnector as the main monitor or the submonitor.Main: Defines the monitor as the mainmonitor.Sub: Defines the monitor as the submonitor.For details, see “Displaying the Pictureon a Projector or Monitor” on page 157.NotesLanguageLanguage Setup WizardEnglishNext CancelNote
