224 On-screen MessagesLAN configuration error. Connection is notcomplete as an invalid port number isspecified.Check the TCP and UDP port numbers in the LANSetup menu.Line is busy. Try to dial again later. Connection has filed as the line is busy. Try to dialagain later.Local number is not set correctly in theISDN Setup menu. Set it correctly. Lineconnected with 1B (64K).ISDN line has been connected with 1B (64K)channel. Set the local numbers correctly in theISDN Setup menu.Local number setting for ISDNconfiguration may not be correct in theremote party. Line connected with 1B (64K).ISDN line has been connected with 1B (64K)channel. The local numbers may not be correctlyset in the remote party.H.221 negotiation timeout. Restart thesystem and connect again.Turn off your system, turn it on and try to dialagain.Dialing the same address is invalid. You are calling the same party.The ISDN lines fully occupied. CheckNumber of Lines in the Multipoint Setupmenu, or check whether the ISDN cable isdisconnected.Check the number of ISDN lines is correctly set inthe Multipoint Setup menu, or check the ISDNcable connection.Regarded as a secondary terminal as thenumber of lines for ISDN configuration isdifferent.Some functions may be limited as your system isregarded as secondary terminal.Regarded as a secondary terminal as Far EndCamera Control is set to Off.Some functions may be limited as your system isregarded as secondary terminal.Check the line interface or the IP address isset correctly.Select the line interface correctly or enter thecorrect IP address.Dial setup error. No prefix number isentered.The prefix is not registered in the Dial Setup menu.Dial setup error. No prefix number for LANis entered.The prefix is not registered in the Dial Setup menu.LAN configuration error. PPPoE is set toOn. Check the PPPoE User Name andPassword.PPPoE is set for LAN connection. Configuration ofthe user name and password is required.LAN configuration error. IP Precedenceexceeds the maximum value.Set the IP Precedence value between 0 and 7 in theLAN Setup menu.LAN configuration error. Diffserve exceedsthe maximum value.Set the Diffserve value between 0 and 64 in theLAN Setup menu.Connection using SIP is not available.Parameter error.Connection using SIP cannot be made as the SIPconfiguration is not correct. Check the settings inthe SIP Setup menu.Connection using SIP is not available.System call error.Connection using SIP cannot be made as thisSystem has a problem.Connection using SIP is not available.Memory over.Connection using SIP cannot be made as thememory of this system is fully occupied.Message Meaning
