Sony IPELA PCS-G50 Operating Instructions Manual

Also see for Ipela PCS-G50: Technical documentation Operating instructions Connection guide Guide

Contents

145Conducting a Data Conference Using NetMeeting – T.120 Data ConferenceTo connect to a computer via a hubConnect the Communication Terminal to a computer using the UTP straightcable.To configure the Communication TerminalOpen the “Device Setup” on page 1 of the General Setup menu, and then enterthe IP address of the computer where the NetMeeting application is installedin the “T.120 PC Address” text box. (See page 57.)Set “T.120 Data” to “On” on the Communication Setup menu. (See page 51.)We recommend that you set “Audio Mode” to “G.728” on the Communication Setupmenu.To connect to a remote party using NetMeetingBefore connecting, install the NetMeeting application in your computer.1 Double-click the NetMeeting icon, or click “NetMeeting” from the Startmenu on the computer’s window.NetMeeting starts.2 Set the Communication Terminal to communication mode.Check that the “T.120” indicator is displayed on the monitor screen.3 Click “Calling” in the NetMeeting window on the computer of either alocal or remote party.4 Enter the IP address set for the Communication Terminal in the “Address”text box of the “Call to” dialog box.NoteTERMINAL VISCA OUT(MIXED) AUXAUX MONITORLINEAUX CONTROLVIDEO OUTAUDIO OUT AUDIO INMICVIDEO INEC-MICCTRL-SRGB OUT DSBISDN UNITIR OUT1 21 21 21 2DC 19.5VCAMERA AUX INWHITEBOARD 100BASE-TX/10BASE-T(PLUG IN POWER)to 100BASE-TX/10BASE-TComputerUTP straight cable (not supplied)to LAN connectorHub