Siemens SINUMERIK 840D sl Operating Manual

Also see for SINUMERIK 828D Turning: Diagnostic manual Function manual Equipment manual Programming manual Operating manual

Comparison topology (*.ust)NotePrerequisite for comparison topologyOn the "SINAMICS topology" dialog page, a comparison topology is always used if, on the"System configuration" dialog page at DRV archive data / Drive configuration, for "Origin ofdata"Initial state, Automatic configuration, or Offline archive has been selected.On the "SINAMICS topology" dialog page, a comparison topology is always used if, on the"System configuration" dialog page at DRV archive data / Drive configuration, for "Origin ofdata"Initial state, Automatic configuration or Offline archive has been selected.With the comparison topology, the DRIVE-CLiQ wiring and components are checked basedon the SINAMICS target topology from the DRV archive.The following properties available for the "comparison topology (*.ust)" are activated when thepackage is executed:List Clicking the button opens the "List of topologies (*.ust)" dialog.Select the desired topology from the list.Comparison topologies can be pasted or inserted as link at "List".These are also saved in the package during deployment and can be selectedduring package execution.Preselection Select a topology that is to be preselected for the package execution.Alternatively, enter the path of a file which is located next to the package "//", e.g. "Comparison topology.ust".User-specified topology (*.utz)NotePrerequisite for user-specified topologyIf, on the "System configuration" dialog page, User-specified topology has been selected at"DRV archive data / Drive configuration > Data source", a configured user-specified topologyalways applies.If no critical inconsistency with the real topology is found by the drive in the user-specifiedtopology, the user-specified topology is applied as the user-specified target topology ofSINAMICS.Create MyConfig - Expert4.4 Project folderSINUMERIK Integrate Create MyConfig - Diff, Expert, Topo200 Operating Manual, 12/2017, A5E36537479B-AE