Managing programs12.11 Changing file and directory propertiesTurning660 Operating Manual, 03/2013, 6FC5398-8CP40-3BA112.11 Changing file and directory propertiesInformation on directories and files can be displayed in the "Properties for ..." window.Information on the creation date is displayed near the file's path and name.You can change names.Changing access rightsAccess rights for execution, writing, listing and reading are displayed in the "Properties"window.● Execute: Is used for the selection for execution● Write: Controls the changing and deletion of a file or a directoryFor NC files, you have the option to set the access rights from keyswitch 0 to the currentaccess level, to be set separately for each file.If an access level is higher than the current access level, it cannot be changed.For external files (e.g. on a local drive), the access rights are displayed to you only if settingshave been executed for these files by the machine manufacturer. They cannot be changedvia the "Properties" window.Settings for the access rights to directories and filesVia a configuration file and MD 51050, access rights of the directories and file types of theNC and user memory (local drive) can be changed and pre-assigned.ReferencesA detailed description of the configuration can be found in the following documentation:Commissioning Manual SINUMERIK Operate (IM9) / SINUMERIK 840D slProcedure1. Select the program manager.2. Choose the desired storage location and position the cursor on the fileor directory whose properties you want to display or change.
