Siemens SINUMERIK 840D sl Operating Manual

Also see for SINUMERIK 828D Turning: Diagnostic manual Function manual Equipment manual Programming manual Operating manual

Contents

Programming technology functions (cycles)8.3 Contour turningTurning372 Operating Manual, 03/2013, 6FC5398-8CP40-3BA1Parameters, G code program Parameters, ShopTurn programPRG Name of the program to begeneratedT Tool namePL Machining plane D Cutting edgenumberRP Retractionplane – (onlyfor longitudinalmachiningdirection)mm S / V Spindle speedor constantcutting raterpmm/minSC SafetyclearancemmResidualmaterialWith subsequent residualmaterial removal• Yes• NoCONR Name to save the updatedunmachined-part contour forresidual material removal - (only"Yes" for residual materialremoval)Parameter Description UnitFX (only ShopTurn) Feedrate in X direction (∇ or ∇∇∇) mm/revFZ (only ShopTurn) Feedrate in Z direction (∇ or ∇∇∇) mm/revFS (only ShopTurn) Finishing feedrate - (only for complete machining: ∇ + ∇∇∇) mm/revFX (only G Code) Feedrate in X direction (∇ or ∇∇∇) *FZ (only for G code) Feedrate in Z direction (∇ or ∇∇∇) *FS (only for G code) Finishing feedrate - (only for complete machining: ∇ + ∇∇∇) *Machining • ∇ (roughing)• ∇∇∇ (finishing)• ∇ + ∇∇∇ (roughing and finishing)Machiningdirection• Face• LongitudinalPosition • front• back• inside• outsideD Maximum depth infeed - (only for ∇) mmXDA 1. Grooving limit tool (abs) – (only for face machining direction) mmXDB 2. Grooving limit tool (abs) – (only for face machining direction) mmUX or U Finishing allowance in X or finishing allowance in X and Z – (only for ∇) mm