Programming technology functions (cycles)8.4 MillingTurning408 Operating Manual, 03/2013, 6FC5398-8CP40-3BA1Parameter Description UnitCPX0 or L0Y0 or C0Z0(only forShopTurn)Face Y: The positions refer to the reference point:Positioning angle for machining area – (only single position)Reference point X or reference point length polar – (only for single position)Reference point Y or reference point angle polar - (only for single position)Reference point Z - (only for single position)Degreesmmmm ordegreesmmY0 or C0Z0X0(only forShopTurn)Peripheral surface C: The positions refer to the reference point:Reference point Y or reference point angle polar - (only for single position)Reference point Z - (only for single position)Cylinder diameter ∅ – (only for single position)mm ordegreesmmmmC0Y0Z0X0(only forShopTurn)Peripheral surface Y: The positions refer to the reference point:Positioning angle for machining surface – (only for single position)Reference point Y – (only for single position)Reference point Z – (only for single position)Reference point X – (only for single position)DegreesmmmmmmW Slot width mmL Slot length mmα0 Angle of rotation of slotFace: α0 refers to the X axis or to the position of C0 with a polar reference pointPeripheral surface: α0 refers to the Y axisDegreesZ1 Slot depth (abs) or depth relative to Z0 or X0 (inc) - (only for ∇ and ∇∇∇) mmDXY(only ShopTurn)• Maximum plane infeed• Maximum plane infeed as a percentage of the milling cutter diameter- (only for ∇ and ∇∇∇)mm%DZ Maximum depth infeed - (only for ∇, ∇∇∇ and ∇∇∇ edge) mmUXY Plane finishing allowance for the length (L) and width (W) of the slot.- (only for ∇ and ∇∇∇)mmUZ Depth finishing allowance (tool axis) - (only for ∇ and ∇∇∇) mm
