Siemens Acuson S1000 Instructions For Use Manual

Also see for Acuson S2000: Installation instructions

A p p e n d i x D O n - s c r e e n C o n t r o l sD - 1 2 I n s t r u c t i o n s f o r U s e2D-Mode Parameter SelectionsSelection DescriptionTrapezoid Trapezoid/LinearEnables linear or trapezoid image format for linear transducers. On displays a trapezoid image. Off displays a linear image.Note: For systems without a touch screen, the selection is assigned to a soft key.Space Time Adjusts the balance between the image line density (resolution) and the frame rate. 0 to 3Note: For systems without a touch screen, the selection is on the LED panel.Maps Selects a processing curve that assigns echo amplitudes to gray levels. A, B, C, D, E, FNote: For systems without a touch screen, the selection is on the LED panel.Tint Changes the color of the image by adding blue, red, yellow, or green to the gray in a gray map. Available settings: transducer-dependentNote: For systems without a touch screen, the selection is on the LED panel.Edge Edge EnhancementDistinguishes the contours of a structure during imaging. 0 (none) 1 to 4Note: For systems without a touch screen, the selection is on the LED panel.Persist PersistenceCreates a visible smoothing effect by maintaining lines of image data for each frame ofimaging. A higher setting includes more frames in the image data. Available settings depend on the transducer and exam typeTHI Tissue Harmonic Imaging Enables or disables the Tissue Harmonic Imaging feature, used to enhance contrastresolution.Note: For systems without a touch screen, the selection is assigned to a soft key.