Menu
Sharp CE-158 Instruction Manual
Also see for CE-158: Operation manualService manual
                                                                                                    |
A ll and more about Sharp PC-1500 at http://www.PC-1500.infoThe following messagge may be put on the display of the PC-1 !>DO when the CE· 158 POWERswitch is off before turning on the PC-1500 POWER switch or when power supply from Ni-Ca db.atteries is low.(~:C_H_E_C_K_S______ _ ~)In this case, recharge the battery or tum on the CE·158 POWER switch.When the CE-158 is connected with the CE · 1 50 and the battery voltage of the CE·150 is alsolow,( :_~.~ .ECK 68 _ ___)is displayed.Under the following condition,(~N_E_W_0~? _:C_H_E_C_K~_S _· ~~~~ ~~~~~)may be displayed. However, NEW JiJ I <•n•1 operation is not requ ired in this case.• When the PC· 1500 is turned ON under the Auto Power Off condition• And CE· 158 power is OFF or the battery of CE · 158 is low.In dlis case, win on the CE-158 POWER switch or recharge the battery, and press the l « i keyto clean the PC·1500 .(NOTE) Do not connect or disconnect t he AC adaptor to the CE· 158. when the program isexecuted with the P C· 1500. Otherwise, the ERROR 50 may occur.Supply voltage of PC -1500The CE-158 will not perform a proper operation when the battery indicator " · "lo oks v;eakas seen from the fr-o nt, as it alerts low battery condit ion for the PC· 1500. The b att ery indicatoris locat ed to t he right side of the display. In such a case, either replace the bat tery of the PC·1500, with the fresh one or co·nnect the AC adaptor EA· 150 into the ada pt or jar.k of thePC·1500.The EA· 150 is an AC adaptor supplied with for the Printer/Cassette Interface CE· 150.2. Initial state after power on after [o") key power off.When power is turned on to the PC·1500. the CE·158 is placed in the following initial state.Item Parameter Des.er iptionSETCOM 300. 8, N, 1SE TD EV All devices are cleared.OUTSTAT 3 DTR and RTS =OFFCONSOLE 0,0 END code = CR codeZONE 13TAB 0Although power·on after auto-power-off resumes the same <:ondition im mediately beforeauto·power·otf, it may be in the: state of "OUTSTAT 3" until a command is executed for theCE-158,16Do not sell this PDF !!! |
Related manuals for Sharp CE-158
This manual is suitable for:
Product
Learn More
Legal
Copyright © 2024 OneStart. All Rights Reserved