Menu
Samsung iDCS 500 Technical Manual
Also see for iDCS 500: User guideUser guideUser guideAdministration guideUser instruction
                                                                                                                                         |
iDCS 500 Release 2 / OfficeServ INSTALLATIONTECHNICAL MANUAL PART 3 MARCH 20043.17LED Name Function StatusRUN Displays the power status.• On: Power to the MGIcard.• Off: No power to the MGIcardRX Displays reception of data through anEthernet connection.• Blinking: Data is beingreceived.• Off: Data is not beingreceived. after initializationis complete.TX Displays transmission of data through anEthernet connection.• Blinking: Data is beingtransmitted.• Off: Data is not beingtransmitted.SRV Displays if card is in service.• On: Service is available.• Blinking: Program is beingmodified or configuration isbeing downloaded.• Off: Service is notavailable.DSP Displays if the DSP channel are beingused.• Off: All channels are not inuse.• Blinking (400ms ): 1 to 7channels are in use.• Blinking (200ms ): 8 to 11channels are in use.• Blinking (100ms ): 12 to 15channels are in use.• On: All voice channels (16channels) are in use.IPC Displays the IPC status between the MGIcard and the system.• Blinking: IPC is in normalstatus.• Off: IPC is not in normal astatus.MOD Displays the operation status of the MGIcard.• OFF: The card has bootedand is operating normally.• ON: The card is notnormally on-line. |
Related manuals for Samsung iDCS 500
This manual is suitable for:
Product
Learn More
Legal
Copyright © 2024 OneStart. All Rights Reserved