Samsung Msys 755P User Manual

Also see for F270: User guide

Contents

available fax setup options

APPENDIX A.11ANOTES:• Do not use letterhead paper printed with low-temperature inks, such as those used incertain types of thermography.• Do not use raised or embossed letterhead.• The machine uses heat and pressure to fuse toner to the paper. Insure that anycolored paper or preprinted forms use inks that are compatible with this fusingtemperature (200 °C or 392 °F for 0.1 second).Paper SpecificationsPaper Output CapacityJamming, damage tomachineCutouts or perforations Do not use paper with cutouts orperforations.Problems with feeding Ragged edges Use good quality paper.Category SpecificationsAcid Content 5.5 pH or lowerCaliper 0.094 ~ 0.18 mm (3.0 ~ 7.0 mils)Curl in Ream Flat within 5 mm (0.02 in.)Cut Edge Conditions Cut with sharp blades with no visible fray.Fusing Compatibility Must not scorch, melt, offset or release hazardousemissions when heated to 200 °C (392 °F) for 0.1second.Grain Long GrainMoisture Content 4 % ~ 6 % by weightSmoothness 100 ~ 400 SheffiedSymptom Problem with Paper SolutionOutput Location CapacityFace-down output tray 150 sheets of 75 g/m2 bond (20 lb) paperFace-up output slot 1 sheet of 75 g/m2 bond (20 lb) paper