Samsung Msys 755P User Manual

Also see for F270: User guide

Contents

available fax setup options

xviReplacing the Fitted Plug (for UK Only)IMPORTANTThe mains lead for this machine is fitted with a standard (BS 1363) 13 amp plug andhas a 13 amp fuse. When you change or examine the fuse, you must re-fit the correct13 amp fuse. You then need to replace the fuse cover. If you have lost the fuse cover,do not use the plug until you have another fuse cover.Please contact the company from where the machine was purchased.The 13 amp plug is the most widely used type in the UK and should be suitable.However, some buildings (mainly old ones) do not have normal 13 amp plug sockets.You need to buy a suitable plug adaptor. Do not remove the moulded plug.W ARNINGIf you cut off the moulded plug, get rid of it straight away.You cannot rewire the plug and you may receive an electric shock if you plugit into a socket.IMPORTANT WARNING: You must earth this machine.The wires in the mains lead have the following color code:• Green and Yellow: Earth• Blue: Neutral• Brown: LiveIf the wires in the mains lead do not match the colors marked in your plug, do the following:You must connect the green and yellow wire to the pin colored green and yellow or green ormarked by the letter “E” or by the safety `Earth symbol.'You must connect the blue wire to the pin colored black or which is marked with the letter “N.”You must connect the brown wire to the pin colored red or which is marked with the letter “L.”You must have a 13 amp fuse in the plug, adaptor, or at the distribution board.