Samsung Msys 755P User Manual

Also see for F270: User guide

Contents

available fax setup options

FAXING6.34Advanced Fax Setting OptionsOption DescriptionSend Forward You can set the machine to always forward all of theoutgoing faxes to a specified destination, in addition to thefax numbers you entered.Select Off to turn this feature off.Select On to turn this feature on. You can set the numberof the remote fax machine to which faxes are forwarded.RCV Forward You can set your machine to forward incoming faxes toanother fax number during a specified period of time.When a fax arrives at your machine, it is stored inmemory. Then, the machine dials the fax number that youhave specified and sends the fax.Select Off to turn this feature off.Select On to turn this feature on. You can set the faxnumber to which faxes are forwarded. Then, you can enterthe starting time and/or the ending time. The Print LocalCopy option allows you to set the machine to print thefax, if fax forwarding is completed without any error.Toll Save You can set your machine to store your faxes in memoryand send them at the specified toll-saving time. For detailsabout Toll Save mode, see page 1.38.Select Off to turn this feature off.Select On to turn this feature on. You can set the startingtime and/or the ending time for Toll Save mode.Junk Fax Setup Using the Junk Fax Barrier feature, the system will not acceptfaxes sent from remote stations of which there machine ID’sare stored in the memory as junk fax numbers. This feature isuseful for blocking any unwanted faxesSelect Off to turn the feature off. Anybody can send you a fax.Select On to turn the feature on. You can set up to 10 faxnumbers as junk fax numbers using the Set option. Thisfeature recognize the last 6 digits of the fax number set asa remote fax machine’s ID. After storing numbers, you donot receive any faxes from the registered stations. Todelete all the junk fax numbers, use the All Deleteoption.Secure Receive You can keep your received faxes from being accessed byunauthorized people.For further details about setting this mode, see page 6.29.