3–Fibre Channel ConfigurationConfiguring Virtual Ports (NPIV)52 BK3254601-00 CSetting QoS by PriorityTo set the QoS by priority with QConvergeConsole GUI:1. In the QConvergeConsole tree pane on the left, expand a 2700 SeriesAdapter.2. Select a virtual port.3. In the content pane on the right, click the QoS tab.4. In the QoS Type box, select Priority.5. Move the slider to select a low, medium, or high priority, as shown inFigure 3-10.Figure 3-10. Setting the QoS by Priority6. Click Save.To set the QoS by priority with interactive QConvergeConsole CLI:1. From the Fibre Channel Adapter Configuration menu, select the QoSoption.2. From the port menu, select a port to open the QoS Type Menu. Select 1:QoS Priority to set the priority.
