|
A–TroubleshootingTroubleshooting with a Diagnostic Port (D_Port)104 BK3254601-00 CTo disable D_Port diagnostic mode:From the Brocade Fibre Channel 16G or 32G switch, issue the followingcommands:# portdisable # portcfgdport ––disable # portenable The D_Port test stops.Checking D_Port Results from a Brocade Fibre Channel 16Gor 32G SwitchTo view the D_Port test results from a Brocade Fibre Channel 16G or 32Gswitch:1. To get the port number, issue the switchshow command:# switchshowThe following example output identifies port 17:17 17 011100 id N16 Online FC D-Port Loopback->Port 172. Issue the portdporttest command as follows:# portdporttest --show For example:# portdporttest --show 17Following is an example output for this command.portdporttest --show 17D-Port Information:===================Port: 17Remote WWPN: 21:00:00:0e:1e:11:4a:31Mode: AutomaticNo. of test frames: 1 MillionTest frame size: 1024 BytesFEC (enabled/option/active): Yes/No/NoCR (enabled/option/active): Yes/No/NoStart time: Thu Aug 14 01:45:37 2014End time: Thu Aug 14 01:47:40 2014Status: PASSED==============================================================================Test Start time Result EST(HH:MM:SS) Comments
|
