18Setting of PC Input1. Display the Video Adjustment Menu.(Refer to page 15)1280x1024@60HzBRIGHT 0CONTRAST 0H-POSITION 0V - POSITION 0CLOCK 0PHASE 0COLOR TEMP USER COLORUSER COLOR R 20USER COLOR G 20USER COLOR B 20OSD H-POSITION 0OSD V-POSITION 0VOLUME 0LANGUAGE ENGLISHNORMAL SETTINGSPC IN2. Set the BRIGHT, CONTRAST, VOLUME, and LANGUAGEparameters. Please refer to page 16 for the operation method.3. Move the cursor to each setting parameter listed below with the PIP or POS button, then adjust the level of the selecteditem with the - or + button.4. Move the cursor to the COLOR TEMP parameter with the PIP or POS button, then select color temperature of dis-play with - or + button.Set the RGB in step 5 in case USER COLOR is selected.USER COLOR : Pictures are displayed in specifiedcolor temperature.9300K : Pictures are displayed in bluishcolor temperature.6500K : Pictures are displayed in reddishcolor temperature.Note:• Each setting parameter can be set at a range of -20 ~20. However, there are cases that no changes in setvalue even when - or + button is pressed.5. Move the cursor to either USER COLOR R, USER COLOR G,or USER COLOR B parameter in the menu with the PIP or POS button, then adjust the red, green, or blue color for colortemperature.- : Decreases the red, green, or blue color.+ : Increases the red, green, or blue color.6. To reset the monitor to the default settings, move the cursor tothe NORMAL SETTINGS with the PIP or POS button,then press the - or + button to restore the default settings.When - or + button is pressed, NORMAL SETTINGS is dis-played and then, AUTO TUNING is displayed on the center ofthe screen as shown below.Note:• During reset, setting parameters of the Video AdjustmentMenu only are being reset.1280x1024@60HzBRIGHT -12CONTRAST 8H-POSITION 5V - POSITION 5CLOCK 4PHASE 7COLOR TEMP 6500KUSER COLOR R 15USER COLOR G 15USER COLOR B 15OSD H-POSITION 1OSD V-POSITION 20VOLUME 2LANGUAGE ENGLISHNORMAL SETTINGSPC IN1280x1024@60HzBRIGHT 0CONTRAST 0H-POSITION 5V - POSITION 5CLOCK 4PHASE 7COLOR TEMP USER COLORUSER COLOR R 20USER COLOR G 20USER COLOR B 20OSD H-POSITION 1OSD V-POSITION 20VOLUME 2LANGUAGE ENGLISHNORMAL SETTINGSPC INNORMAL SETTINGS AUTO TUNINGH-POSITIONV-POSITIONCLOCKPHASEOSDH-POSITIONOSDV-POSITIONItem Effect IndicatorRight LeftDown UpContract ExpandRight LeftLeft RightUp Down