Panasonic WV-LC1710 Operating Instructions Manual

Also see for WVLC1710 - LCD MONITOR: Specifications

Contents

Panasonic WV-LC1710 Operating Instructions Manual Manual pdf 15 page image

15Settings of this monitor can be done in the Video Adjustment Menu. The display on the screen differs depending on the input signal.Caution:• When onscreen display of NO SIGNAL, OUT OF RANGE, VIDEO LOSS, etc., appears on the center of the screen, the VideoAdjustment Menu cannot be displayed even if MENU button is pressed.Input Signal Menu TitleVIDEO INS-VIDEO INCOMPONENT INPC INComposite VideoS-VideoComponent VideoPCNTSCBRIGHT 0CONTRAST 0SHARPNESS 0COLOR 0TINT 0VOLUME 0H-POSITION 0COLOR TEMP STANDARDSCAN FULLLANGUAGE ENGLISHNORMAL SETTINGSVIDEO INMenu TitlePALBRIGHT 0CONTRAST 0SHARPNESS 0COLOUR 0TINT -VOLUME 0H-POSITION 0COLOUR TEMP STANDARDSCAN FULLLANGUAGE ENGLISHNORMAL SETTINGSVIDEO INMenu TitleIf the menu title is VIDEO IN, S-VIDEO IN or COMPONENT IN, thefollowing characters appears next to the menu title.NTSC : When NTSC signal is inputted.PAL : When PAL signal is inputted.B/W : When black and white signal with 60 Hz/50 Hz field fre-quency is inputted in composite video input.During PC IN, the current signal being displayed is in the form“Horizontal Resolution × Vertical Resolution @ Field Frequency”on the latter part of the menu title based on the timing data list (onpage 8).Note:• In case the frequency of connected PC is not included inthe timing data list, the signal may not be displayed cor-rectly.Caution:• If power is cut off while setting, it will not store the settingsthat have changed.DISPLAYING VIDEO ADJUSTMENT MENUDisplaying Video Adjustment Menu1. Press the MENU button.Video Adjustment Menu is displayed on the screen.The menu title display changes depending on the input sig-nal.2. Set each setting parameter.Presently selected line is the line being highlighted.Move to item down or up: Press PIP or POS button.Change and adjust the settings: Press - or + button.Store the settings: Settings are stored if menu button is pressed.It displays off the Video Adjustment Menu.