Panasonic WV-LC1710 Operating Instructions Manual

Also see for WVLC1710 - LCD MONITOR: Specifications

Contents

Panasonic WV-LC1710 Operating Instructions Manual Manual pdf 16 page image

16NTSCBRIGHT 0CONTRAST 0SHARPNESS 0COLOR 0TINT 0VOLUME 0H-POSITION 0COLOR TEMP STANDARDSCAN FULLLANGUAGE ENGLISHNORMAL SETTINGSVIDEO INPALBRIGHT 0CONTRAST 0SHARPNESS 0COLOUR 0TINT -VOLUME 0H-POSITION 0COLOUR TEMP STANDARDSCAN FULLLANGUAGE ENGLISHNORMAL SETTINGSVIDEO INSetting of Composite Video / S-Video / Component Video InputNotes:• BRIGHT, CONTRAST, SHARPNESS, COLOR,and TINT can be set to different values for each inputsignal.• TINT applies for NTSC system only.1. Display the Video Adjustment Menu.(Refer to page 15)2. Move the cursor to each setting parameter listed below with the PIP or POS button, then adjust the level of the selecteditem with the - or + button.3. Move the cursor to the COLOR TEMP (NTSC) or COLOURTEMP (PAL) parameters with the PIP or POS button, thenselect color temperature of display with - or + button.STANDARD : Pictures are displayed in normalcolor temperature.9300K : Pictures are displayed in bluishcolor temperature.6500K : Pictures are displayed in reddishcolor temperature.4. Move the cursor to the SCAN parameter with the PIP or POS button, then select scanning area with - or + button.FULL : Vertical and horizontal picture size are equal tothe display panel size. Picture aspect ratio is dis-regarded and the vertical size of picture is a littlestretched.OVER : The vertical size of picture is fitted to the height ofthe display panel.Picture is cut on left and right sides for making theexpansion ratio of both vertical and horizontal sizeinto 1 : 1.UNDER : The horizontal size of picture is fitted to the widthof the display panel.Black horizontal bar appears on top and bottom ofthe picture for making the expansion ratio of bothvertical and horizontal into 1 : 1.5. Move the cursor to the LANGUAGE parameter in the menu withthe PIP or POS button, then select the desired languagewith the - or + button.Pressing the button repeatedly displays the language as shownbelow.BRIGHTCONTRASTSHARPNESSCOLOR(PAL: COLOUR)TINT(NTSC ONLY)VOLUMEH-POSITIONItem Effect IndicatorDarker BrighterLess MoreSoft SharpLess MoreGreenish ReddishDecrease InccreaseLeft Right